EU Regulation (EU) 2019/1009
EU Regulation (EU) 2019/1009
Regulation (EU) 2019/1009 lays down rules on the making available on the market of EU fertilising products. It replaced the former Regulation (EC) 2003/2003, introduced product function categories (PFCs) and component material categories (CMCs) covering mineral, organic, organo-mineral, liming, soil improver, inhibitor and plant biostimulant products, and set cadmium and contaminant limits for CE-marked fertilisers.
Key points
Regulation (EU) 2019/1009 of the European Parliament and of the Council of 5 June 2019 lays down rules on the making available on the market of EU fertilising products. It repealed and replaced Regulation (EC) No 2003/2003 and became applicable from 16 July 2022.
The regulation marks a fundamental change of approach. The former regime covered only mineral fertilisers and harmonised them by product type. The 2019 regulation instead regulates by function and by constituent material, which allowed it — for the first time — to bring organic, organo-mineral, liming, soil improver, growing medium, inhibitor and plant biostimulant products into a single harmonised framework.
Products are grouped into Product Function Categories (PFCs) and, on the input side, into Component Material Categories (CMCs). A product may carry the CE marking only where both its PFC and every constituent material fall within the categories defined by the regulation. This is the central compliance logic: the CE mark is not a general quality label but a statement that every input material is permitted.
The regulation sets contaminant limits for CE-marked fertilising products. The best known is cadmium: for phosphate fertilisers the limit is expressed in milligrams of cadmium per kilogram of phosphorus pentoxide, with differentiated thresholds depending on the phosphorus content of the product. Limits also apply to other heavy metals and to pathogens where relevant.
Plant biostimulants were recognised as a distinct product category for the first time under EU law by this regulation. Their claimed function must be limited to stimulating plant nutrition processes independently of the nutrient content of the product, and claims must be substantiated by the evidence requirements set out in the relevant annexes.
Labelling and conformity assessment obligations follow from the PFC. Manufacturers must draw up technical documentation, apply conformity assessment procedures, issue an EU declaration of conformity and affix the CE marking. Products that fall outside the scope of the regulation may still be placed on national markets under national rules.
Document details
- EU Regulation (EU) 2019/1009(EU 2019/1009)
Updated:Oct 16, 2026